VERSIONS AVAILABLE IN ALL DIAMETERS, THICKNESSES AND FLOW RATES:
ANTI-SIPHON to prevent impurities entering from the outside.
NO-DRAIN to simultaneously open and close all the drippers (0.45 bar opening pressure and 0.20 bar closing pressure).

DIAMETERS AND THICKNESSES AVAILABLE:
Ø 16 mm thickness 0.9 - 1.0 - 1.1 mm
Ø 20 mm thickness 0.9 - 1.0 - 1.2 mm

ANTI-SIPHON AND NO-DRAIN DRIPPER FLOW RATES:
1.2 l/h
1.6 l/h
2.4 l/h
3.8 l/h

Pressure-compensating between 0.5 and 3.5 bar.

The Neptune PC drip line is easy and fast to install.
The quality of the material used for the tube provides high resistance to deterioration and hence multiyear durability at maximum drip line performance. In addition, the dripper fitted in the tube is protected against impact and rubbing as well as possible degradation due to temperature changes and the action of UV rays.

The pressure-compensating system allows considerably increasing the length of the lines compared to a classic system, but especially having great emission uniformity across the entire irrigation sector, both between drippers belonging to the same lateral line and those belonging to different lines.

Like all Toro products, Neptune PC features high resistance to clogging; moreover, thanks to the dripper’s silicone membrane, it can be used for fertigation without any problems and with all the chemical products normally used in agriculture.

Neptune PC is suitable for irrigation of orchards, vineyards, olive groves and greenhouse crops. Its feature of maintaining the same irrigation capacity means that it can also be used on large surfaces with long laterals. In addition, the possibility of choosing the spacing together with the range of drippers allows a great variety of applications and considerable flexibility in design.

The ANTI-SIPHON system prevents impurities entering from the outside and can therefore also be installed underground, perfectly maintaining its irrigation characteristics and its multiyear durability.

The NO-DRAIN system is the version specifically designed to be installed in all irrigation systems where short and frequent irrigation cycles are required. Thanks to its low-pressure closing system, the dripper allows preventing leaks thus ensuring perfect irrigation uniformity as well as always maintaining the system pressurized hence resulting in a further saving in time, water and energy.