Aqua-Traxx PC

Applications
Aqua-TraXX^® PC is ideal:
to irrigate crops in difficult topographical conditions
in installations requiring long laterals

Features
F e a t u r e s
Pressure compensating (ISO 9260-9261):
flow exponent X = 0,2
Coefficient of variation  0,3% for all emitters
Seamless construction; no more splitting at the seam
Ultra high strength and flexibility
Multiple laser slit outlets
Blue stripes, signature of quality and useful installation aid
Turbulent flow path
Two flow rates: 0,76 l/h and 1,02 l/h

Installation
The double “blue" stripe must face upwards for warranty validity
Aqua-TraXX® PC can be buried, laid under black plastic film or installed on the ground
During installation it must not be pulled, cut, perforated or scuffed
If soil is infested with insects which can damage the tube then some form of soil treatment must be considered
To prevent blockages, flush out main and secundary lines before connectng tape
Buried Aqua-TraXX® PC should be pressured within 24 hours to prevent flow restriction by soil compation
Only use water soluble fertilisers and flush the lines of any deposits before terminating irrigation
It is advisable to mount vacuum breaker valves on the submains to avoid the possibility og impurities being sucked back through the outlets of the Aqua-TraXX® PC during shutdown of the system
Filtration: it is required a minimum filtration of 200 mesh
(74 micron)

Codes
EAP 5 10 8 34 - 750
EAP Pressure compensanting
5 Diameter 5/8" (16 mm)
10 Wall thickness 10 mil of inch (0,25 mm)
08 8"Spacing 8" (20 cm)
34 Flow rate (g/min/100 p)
750 Reel lenght in FT/10