Drip In PC

Applications
Ideal to irrigate crops in difficult topographical conditions, varying water pressures and in installations requiring long laterals.

Features
Drip In PC (pressure compensating) dripline has a built in flow regulated emitter that provides a constant discharge over a pressure range of 0,5 bar to 4,2 bar. The emitter is installed in the tube during the extrusion process. This prevents damage and loss of dripper and reduces labour and installation costs.

Advantages
Resistant to clogging
The flow rates never exceeds nominal flow rate
Drip In PC is the only dripline featuring dual-opposed exit holes to prevent re-entry of dirty during vacuum phase at the end of each irrigation cycle
Drip In PC emitter body is made from polyethylene resins. The diaphragm is made from silicon. This combination will withstand acids down to pH2 as well as chemicals, fertilisers and chlorine
The emitters performance is not affected by changes in water temperatures.
Five years' warranty.

Versatility
Drip In PC is highly versatile
Drippers are aviable with five differents flow rates
(1,6-2,0-2,4-2,8-3,8 l/h) and can be inserted into two
hose sizes :
- 16 mm (I.D. 14 mm / O.D. 16,2 mm)
- 20 mm (I.D. 18 mm / O.D. 20,4 mm)
Unlimited spacing options plus group spacing provide greater design flexibility
Drip In PC can be used in permanent installation or row crops where it is laid out and re-rolled easily
Standard reel-length:
- 300 m per O.D. 20 mm
- 400 m per O.D. 16 mm
Drip In PC may be hung on wire, laid on the surface or buried (SSDI).

Codes
EHD PC E XX xx - xx
PC Pressure compensating
XX Ø O. D. (mm)
xx Dripper (l/h)
xx Emitter spacing (cm)